How do you apply a quick clot?

How to Apply a Quick Clot:

1. Prepare the wound. Clean and disinfect the wound before applying a quick clot. This will help prevent infection and ensure the quick clot adheres properly.

2. Open the quick clot package. Remove the quick clot from the package and unfold it.

3. Apply the quick clot to the wound. Place the quick clot over the wound, making sure it covers the entire area of bleeding.

4. Press firmly. Use your hand to press the quick clot firmly against the wound. This will help stop the bleeding and allow the quick clot to adhere.

5. Hold in place. Hold the quick clot in place for at least 5 minutes. This will give the quick clot time to seal the wound and stop the bleeding.

6. Seek medical attention. If the bleeding does not stop after 5 minutes, or if the wound is deep or severe, seek medical attention immediately.

Here are some additional tips for applying a quick clot:

* If the wound is on the face or neck, be careful not to apply the quick clot too tightly. This could cause breathing difficulties.

* If the wound is on the hand or foot, be sure to apply the quick clot between the fingers or toes. This will help prevent the quick clot from slipping off.

* If the wound is bleeding heavily, you may need to apply more than one quick clot.

* Quick clots are not a substitute for medical attention. If the wound is deep or severe, seek medical attention immediately.