How to Build Your Own Rife Machine

A Rife machine, or Rife resonator, is a device that is able to generate frequencies to destroy a wide range of bacteria, fungi and viruses and even cancerous cells. A resonator is used in this therapy, and regular sessions of resonance therapy are claimed to strengthen the body's immune system against infectious deceases. Dr. Royal Rife discovered this natural phenomenon in the 1930s and shared it with the world. There are clinics available to receive Rife therapy, or machines you can purchase, but these methods can become very costly. For a less expensive option to receive Rife therapy, you can use common household devices to create your own Rife machine.

Things You'll Need

• Computer
• Stereo (100W minimum per channel)
• Software purchased from suggested site

Show More

Instructions

How to Build Your Own Rife Machine

• 1

  Research online for the best company that will help you build your own Rife machine for the cost and effectiveness that you are looking for. There are many places out there that claim to produce the best Rife machines, but you should find the one you like the best. A suggested site to research and purchase from is www.noriftrife.com.

• 2

  Purchase the software from the company after you have researched and found the best price for your Rife machine. On the suggested site, NoRiftRife, their basic package is $79.77 and the most expensive package is $259.77. These packages range in what you receive, from just the software to including four electrodes that aid in the transmission of the frequency waves.

• 3

  Decide whether you would like to purchase an amplifier from the suggested site or use an amplifier of your own. The site provides a 6216 Mini Amplifier, or you can use any amplifier as low as a 15W per channel (though the site recommends a higher amount).

• 4

  Install the software that has been purchased on a computer that has Windows Vista, Windows 2000 or Windows XP. Follow the included directions. The software should be installed according to the directions it comes with.

• 5

  Make sure to have two types of connectors and electrodes (the connectors and electrodes can be purchased from the suggested site). One connector should go from the computer to the stereo and the second from the amplifier to the electrodes. The electrodes are what the "patient" holds on to to receive the various frequency waves.

• 6

  Use the device. Once everything is connected, choose a frequency for your specific ailment, hold on to the electrodes and start the emission of the frequency. As the waves travel through the body, the machine produces a mechanical vibration in the "target cells." If the induced resonant vibration is intense enough, the target cell, tissue or molecule will be destroyed.

• 7

  Modify the frequency of your new Rife machine to achieve the intended results. You can use this machine to help treat many different illnesses.