Directions for the Use of ePen

The ePen, created and manufactured by Siemens, is a remote control that interfaces with hearing devices. The device runs on a single AAA battery and uses the same power and control system as other remote controls, such as those you use for a TV. The device is sensitive to temperature, humidity, water and abrasive cleaning solutions. If you are looking to simplify your hearing aid management with an ePen, speak to your audiologist or hearing device retailer.

Things You'll Need

• AAA battery

Show More

Instructions

• 1

  Remove the top of the ePen by unscrewing it. Grasp the cover of the ePen's backside and pull it away from the center.

• 2

  Slide a AAA battery into the battery slot with the positive side of the battery facing the center of the ePen. Slide the cover back onto the ePen, and screw the top onto the device.

• 3

  Slide the cap off the ePen to access the control panel. Turn the ePen on by pressing any of the buttons on the control panel. The ePen works like a remote control and does not need to be turned off. If you wish to avoid pressing a button, close the cap.

• 4

  Press the on/off button of the ePen to power your hearing device off or on.

• 5

  Turn the cap of the ePen towards the plus sign on the control panel to increase the volume of your hearing aid. Turn the cap of the ePen towards the minus sign to decrease the volume. When the volume reaches the desired level, turn the cap back to its original position.

• 6

  Press the button under "Program" to switch to the program one higher than your current program. For example, if you are at program two and wish to switch to program five, press the button three times.