How to Calibrate the One Touch Ultra Diabetes Monitor
Things You'll Need
- Test strips
Instructions
-
-
1
Find the code on the side of the test strip container. You will find the word "Code" on the label with a number written underneath the word. This is the code you need to calibrate the meter.
-
2
Turn off the meter. Insert a clean test strip into the meter, with the arrow pointing inward. Push the strip in all the way until it stops. Be careful not to bend the strip.
-
3
Wait for three dashes to flash across the screen.
-
4
Press the "C" button on the monitor after the three dashes appear. Continue pressing the C button until the number on the screen matches the code number on the test strip bottle. Since the number on the screen goes up by one every time you press the button, this may take a few moments.
-
5
Wait three seconds or until a "teardrop" icon appears. When that icon flashes on the screen, the One Touch Ultra has been calibrated and is ready for use.
-
1
Diabetes - Related Articles
- How to Calibrate Ultra Slim One Touch
- How to Calibrate the Ultra One Touch Diabetes Machine
- How to Get Past Readings on the One Touch Ultra 2
- How to Use the One Touch Ultra 2
- How to Troubleshoot Error #5 in a One Touch Ultra Mini
- How to Use the One Touch Ultra Monitor
- How to Calibrate a One Touch Ultra Mini