How to Pair Phonak With Smartlink FM

For hearing aid users, a common complaint is hearing clarity in noisy situations. The SmartLink SX Frequency Modulation (FM) transmitter adds wireless flexibility as part of a hearing aid system, particularly where noise and distance may add barriers, such as for presentations or lectures. SmartLink is a proprietary device manufactured by Phonak, but depending on the technology used, it may be compatible with devices made by other manufacturers.

Things You'll Need

• SmartLink SX transmitter
• Compatible FM receiver
• Bluetooth compatible phone (optional)
• Hearing aid with T-coil capability

Show More

Instructions

FM Operation

• 1

  Charge the SmartLink SX transmitter and compatible FM receiver. Switch each device on and make sure hearing aids are switched to T-coil program.

• 2

  Turn on the SmartLink SX. It will use its internal microphone upon start up. At this point, the user should hear sounds coming from the SmartLink unit.

• 3

  Place the SmartLink unit near the desired speaker or sound source. A lanyard is included for use by a lecturer, for instance. Adjust volume for comfort using "+" and "-" on the SmartLink keypad.

Bluetooth Operation

• 4

  SmartLink SX is Bluetooth compatible.

  Pair the SmartLink with your cell phone using the cell phone procedure. Switch on the SmartLink and press and hold both green and red telephone buttons. Your phone will register the SmartLink as a Bluetooth unit. Enter "1234" when prompted for a pass code.

• 5

  Check that Bluetooth operation is active. If the Bluetooth symbol is not present on the SmartLink display, press and hold the green telephone button until the "+" sign appears. Press the green telephone button again to connect with your phone. Be sure your FM receiver is switched on.

• 6

  Place the call using the SmartLink as your interface for hearing and speech. Use the lanyard to place the unit around your neck for true hands free capability. End your call on the phone as normal and use the red telephone button on the SmartLink to restore regular operation.