How to Stop Eyeglasses from Sliding
Things You'll Need
- Magnifying glass
- Eyeglass repair kit
- Rubber earpiece sleeves
Instructions
-
-
1
Use a magnifying glass to examine the nose pieces. Each of the nose pieces is held in place with a single screw.
-
2
Place the tip of the tiny screwdriver from the eyeglass repair kit into the head of the screw. Turn the screw just until it yields to the turning. Don't overturn the screw as this can cause damage to the nose piece.
-
3
Tighten the other nose piece screw.
-
4
Use the magnifying glass to view the hinges located at the temple area. Again, there is a single screw on either side of the glasses.
-
5
Place the tip of the screwdriver into the head of the screw. Turn the screw just until it yields to the turning. Don't overturn the screw. Repeat on the other hinge.
-
6
Put on your glasses and wear for some time to determine if this slipping has been resolved. Tightening will usually fix the issue, but if doesn't, proceed to the next step.
-
7
Place a rubber sleeve over each earpiece of your glasses. These sleeves will stretch over every size of earpiece. They sit snugly behind your ear to hold the glasses in place and prevent slippage.
-
1