How to Figure the Mean of a Blood Pressure Reading
Things You'll Need
- Blood pressure cuff
- Stethoscope
- Paper pad
- Pen or pencil
- Calculator
Instructions
-
Reading the Blood Pressure
-
1
Place the blood pressure cuff over the patient's arm, inflating it slightly to keep it in place right above the elbow. Have the patient be still for the remainder of the procedure.
-
2
Place the stethoscope over the crease of the elbow and listen for the beating sounds of the brachial or radial arteries, which run through the crease of the elbow.
-
3
Inflate the cuff to the point where you no longer hear the artery beating.
-
4
Release the air from the cuff steadily, writing down the pressure readings from the pressure dial on the cuff when you begin to hear the artery beating again. That is the systolic blood pressure reading in millimeters of mercury (mmHg). Then write down the reading from the pressure dial when you stop hearing it as a result of no pressure being placed on the artery. This is your diastolic reading.
Calculate Mean Arterial Blood Pressure
-
5
Make sure the patient was at rest throughout the blood pressure reading. Any increases in pulse due to activity or exercise negate the mean arterial blood pressure reading.
-
6
Subtract the diastolic reading from the systolic reading. This is product A.
-
7
Multiply product A by 0.33. This is product B.
-
8
Add the diastolic reading to product B. This is the mean arterial blood pressure reading.
-
1
High Blood Pressure - Related Articles
- How to Test the Electronic Blood Pressure Monitor
- How to Clear the Memory on My Blood Pressure Monitor
- What Is the Optimal Blood Pressure Reading?
- What Is the Meaning of a Diastolic Blood Pressure Reading?
- How to Read Your Blood Pressure Numbers
- Importance of the Diastolic Blood Pressure Reading
- How to Take an Accurate Blood Pressure Reading