How to Clean a 3M Series 7000 Respirator

Respirator masks are used to protect against airborne contaminants that can be harmful for respiratory health. Even dangerous microscopic contaminants can be filtered by these masks. The 3M 7000 Series Respirators are approved by OSHA for use by employers. After each use, respirator masks need to be cleaned and stored away from any contaminated areas. Special attention needs to be taken when choosing cleaning solutions, because solvents can harm the respirator and affect the way the mask operates.

Things You'll Need

• Gloves
• Borax
• Dish soap
• Warm water
• Soft bristled brush

Show More

Instructions

• 1

  Pull on clean gloves. Remove adapters, cartridges, filters, and tubing. Place the removed parts to the side.

• 2

  Mix two teaspoons of borax, one teaspoon of a dish soap, and one quart of warm water in a bowl. Place the face mask into the warm solution. Scrub the face mask with a soft bristled brush.

• 3

  Mix 1/8 cup of borax in a large bowl with one quart of hot water. Soak the face mask in this solution to disinfect. Rinse the mask in warm water and allow to dry before storing.