How to Use Dr. Scholl's Freeze Away Wart Remover
Instructions
-
-
1
Make sure the area with the wart(s) is clean and dry. You may want to cleanse it gently with a mild soap.
-
2
Take the white applicator tip and screw it onto the pressurized can, twisting it clockwise to lock it in securely.
-
3
Place the can upside down on a sturdy surface and push down the applicator tip for about 3 seconds. You may notice a hissing sound and condensation on the tip as it freezes due to the liquid nitrogen.
-
4
Push the applicator tip onto the wart, making sure to cover the entire wart--not just the center. Note that the applicator must still be attached to the can. Do not remove the applicator until after use.
-
5
Twist the applicator counterclockwise and discard it. Be careful not to touch the tip to prevent the HPV, or wart-causing virus, from spreading. Use a new applicator to treat additional warts.
-
6
Wait about 24 hours after treatment and gently cleanse the treated wart with soap and water.
-
1