How do you apply liquid bandage to a cut?

Step 1: Clean the cut

Use soap and water to gently clean the cut and remove any dirt or debris. Be sure to rinse the cut thoroughly to remove all soap.

Step 2: Dry the cut

Pat the cut dry with a clean cloth or paper towel. Be careful not to rub the cut, as this could irritate it.

Step 3: Apply the liquid bandage

Hold the liquid bandage bottle about 6 inches away from the cut and spray it evenly over the entire area. Be sure to cover the cut and the surrounding skin.

Step 4: Let the liquid bandage dry

Allow the liquid bandage to dry completely before touching the cut. This usually takes about 5 minutes.

Step 5: Reapply the liquid bandage as needed

The liquid bandage will typically last for several days, but it may need to be reapplied if it starts to wear off. Reapply the liquid bandage following the same steps as above.

Tips for applying liquid bandage

* Be sure to clean and dry the cut thoroughly before applying the liquid bandage.

* Hold the liquid bandage bottle at least 6 inches away from the cut to avoid stinging.

* Spray the liquid bandage evenly over the entire cut and surrounding skin.

* Allow the liquid bandage to dry completely before touching the cut.

* Reapply the liquid bandage as needed.

Warnings

* Do not apply liquid bandage to a deep or infected cut.

* Do not apply liquid bandage to a cut that is still bleeding.

* If you have any concerns about applying liquid bandage, talk to your doctor.