How do you remove a dresser drawer from Bellini dresser?

To remove a drawer from a Bellini dresser, follow these steps:

Step 1 - Remove the Knobs

1. Use a screwdriver to remove the screws holding the knobs in place.

2. If there are also safety screws at the back of the knobs, remove them as well.

3. Keep all these screws in a safe place, so you can use them again when reattaching the drawer.

Step 2 - Locate the Drawer Slides

1. Open the drawer as far as it will go.

2. Look underneath the drawer to find the drawer slides.

3. The drawer slides are metal tracks that connect the drawer to the rest of the dresser.

Step 3 - Disengage the Drawer Slides

1. Depending on the type of drawer slide you have, there are different ways to disengage them. Here are instructions for the two most common types:

- Side-mounted drawer slides: These have levers on the sides of the drawer that you need to push in to release the drawer.

- Bottom-mounted drawer slides: There is a small catch on the bottom of the drawer slide. Push that in or up, and the drawer will come out.

Step 4 - Remove the Drawer

1. Once you have disengaged the drawer slides, you can pull the drawer out of the dresser.

2. Be careful not to drop the drawer, as it may be heavy.

Step 5 - Reattach the Drawer

1. When you are ready to put the drawer back in, simply slide it back onto the drawer slides.

2. Make sure that the drawer is fully seated before closing it.

3. Reattach the drawer knobs using the screws you removed earlier.