How to Stop Mold From Spreading

Mold exists in almost every environment. It can grow excessively in hot, humid conditions or where there is extreme weather conditions. Mold can be found in refrigerators, basements, attics, bathrooms, inside wall foundations, or any place that is damp, overheated, and has warm, humid conditions. Mold can spread throughout the area and cause disease and respiratory illnesses. Learn how to keep mold from spreading and keep yourself and those around you healthy.

Instructions

• 1

  Look for areas with excessive water leakage or spills. Open the refrigerator and remove any used food that has been stored too long. Wipe the refrigerator clean with mold-killing products such as vinegar or baking soda.

• 2

  Investigate areas in the basement for water leakage or damp places near the water piping. Try to keep these areas dry by using air conditioners, dehumidifiers or exhaust fans. Always dry wet areas within 48 hours or mold can began forming.

• 3

  Dust often in areas where your family habitats. Clear the attic of dusty particles and dust there often. Search and clean around the water heater for mold infestation.

• 4

  Keep humidity level in the home below 50 percent. But a humidity meter from a hardware store. Be determined to wipe up wet spills on a daily basis.

• 5

  Halt allergy-making particles such as dust, soot, grime, ashes, flakes and sawdust from overwhelming your respiratory system. But humidifiers and air cleaners to keep your home safe. Seek out a qualified licensed professional to inspect your home.