How to Program CPAP Remstar Pro2

The REMstar Pro2 CPAP is a device which provides continuous positive airway pressure (CPAP) and oxygen delivery for patients who momentarily stop breathing while sleeping (apnea). This ensures adequate breathing throughout the night. Prior to delivery, medical supply companies generally program CPAP machines to the specific requirements set by your physician. Some basic programming may be readjusted at home for comfort during use.

Things You'll Need

• REMstar Pro2 CPAP
• User manual

Show More

Instructions

• 1

  Connect the power cord into an outlet and watch for the screen on the REMstar Pro to activate. Wait while the machine performs a self-test and indicates completion. Ensure that the airflow is turned off by reading the screen, which should indicate "P=Off." Press the Pressure button to turn the airflow off if needed. Press the button below Menu and press the "Yes" indicator button to adjust the CPAP settings.

• 2

  Adjust the ramp pressure settings, which may have been preset for you based on your physician’s prescription, if you feel the setting is too high or low. Press "Yes" to leave the current settings, or press the button below the "+1" prompt until you’ve reached the desired setting. Press "Yes" to confirm the setting.

• 3

  Program the alert tone which beeps whenever a continuous air leak has been determined in the CPAP system. Press "Yes" to leave the current setting, or press the button below "No" to change it. Press "Yes" to confirm your setting.

• 4

  Program the button light indicator by choosing to have user-buttons on the CPAP illuminated during night time use while the airflow is running. Press "Yes" to retain current settings, or press the button below "No" to change it. Press "Yes" again to confirm your setting.