Midmark Track Light Operating Instructions

Midmark is a company that produces lighting devices for medical, dental and veterinarian offices. A Midmark track light is a lighting device used in dental offices that is designed to provide adequate light to patients during their procedures and examinations. Operate your track light by powering the device on, adjusting the Intensity setting, changing the Composite setting, adjusting the focus and adjusting the pattern of the light.

Instructions

• 1

  Push and release the "Power" button until the light goes off and there are no green lights lit on the touch pad. Rotate between the On, Off and Auto On/Off settings by pushing the "Power" button.

• 2

  Press and release the "Intensity" button to adjust the intensity of the light. You can make the light intensity either High, Medium or Low. The Indicator light tells you the present setting.

• 3

  Use the Composite Setting for a very low intensity beam of light. Press the "Composite" button in order to use this setting. This illumination level is designed to give the dentist enough light without prematurely curing the composite dental materials used during a procedure.

• 4

  Adjust the focus of the light. Your light's accuracy is affected by adjusting this setting. The factory setting for the focus is 27 Inches distance from the patient to the light head. The light's focal point may be adjusted to any distance between 21 and 39 Inches. Make an adjustment by taking off the back cover and prying the lid open using a screwdriver. Place the light head at the preferred distance from the target and turn the light on. Turn the screw that controls the focus until you get the light pattern you want.