Pipes in Cliff to Stop Erosion
-
Cliffs
-
Cliffs vary in size, structure and sediment composition, which increases the susceptibility of some cliffs to erosion compared to others. For example, cliffs made up of sandstone and clay are more likely to become eroded than cliffs made from granite. Erosion usually occurs from the bottom of the cliff, which creates an imbalance and increases the likelihood of collapse.
Effect of Water
-
In some cliffs, water acts as a lubricant by softening the material, making it easier to wash away. This is likely the most significant contributor to cliff erosion. The water content of cliffs increases as rainfall seeps into the ground. Actions are necessary to both remove water already present and to prevent additional water from penetrating cliffs. This is achieved by installing deep or shallow drainage pipes that transport water out of cliffs, thus improving their sturdiness.
Pipes
-
Cliff pipes are generally non-perforated and made of plastic wrapped in a filter sock or other fabric. The pipes exit at the bottom of cliffs, allowing water to escape. This exit area is normally guarded with rocks to protect against any erosion from wave action. Although shallow drain pipes are effective at removing water and cause minimal disturbance to the cliff, deeper drainage pipes collect and remove more water.
Pipes Causing Erosion
-
Water flowing out of drainage pipes may themselves contribute to erosion. Depending on where the pipe exits the cliff, rocks located below or adjacent to the pipes could become eroded due to constant water flow. For example, in 2002 the Botanical Garden Creek in Canada contained a drainage pipe that ended up approximately 10 meters above the surface because of the erosion impact.
-