What would cause the following artifacts on your ekg 60 cycle interference?

60-cycle interference is a common artifact seen on electrocardiograms (EKGs). It is caused by the electrical current from power lines, which has a frequency of 60 Hz in most parts of the world. This interference can be seen as a regular, wavy baseline on the EKG.

There are a number of things that can cause 60-cycle interference on an EKG, including:

* Faulty electrical equipment: This is the most common cause of 60-cycle interference. Faulty electrical equipment can include anything from a faulty power outlet to a faulty EKG machine.

* Poor grounding: The EKG machine must be properly grounded in order to avoid 60-cycle interference. If the EKG machine is not properly grounded, it can pick up electrical noise from the environment.

* Proximity to power lines: If the EKG machine is located too close to power lines, it can pick up electrical noise from the power lines.

* Patient movement: Patient movement can also cause 60-cycle interference. This is because the patient's body can act as an antenna for electrical noise.

60-cycle interference can be a nuisance, but it is usually not a sign of a serious problem. However, if you are concerned about 60-cycle interference on your EKG, you should talk to your doctor.

Here are some tips for reducing 60-cycle interference on an EKG:

* Make sure that all electrical equipment is in good working order.

* Properly ground the EKG machine.

* Keep the EKG machine away from power lines.

* Ask the patient to remain still during the EKG.