How to Remove a Needle From Luer Lock Syringe
Since the emergence of HIV and AIDS in the 1980s, regulating agencies including the Centers for Disease Control (CDC) and Occupational Health and Safety Administration (OSHA) have made every effort to stop the more than 600,000 accidental needlesticks each year by health care personnel. All facilities using needles have appropriate sharps containers for the safe disposal of used needles, syringes and blood drawing supplies, to decrease the risk of needlesticks. Recapping of used needles is strongly discouraged, but in reality, there are times when medical staff may find the need to recap and remove a needle from a syringe.Things You'll Need
- Luer lock syringe
- Luer lock needle
Instructions
-
How to Remove a Needle From Luer Lock Syringe
-
1
Place the needle cap on the bed or table with the hand that is not holding the syringe. Be careful to keep the needle away from anyone, including yourself.
-
2
Guide the needle into the cap, using just one hand. Do not use your other hand for assistance.
-
3
Pick up the cap with the syringe, so the capped needle is pointing straight up. Carefully grasp the cap near the needle hub, sliding the cap towards the syringe. Twist the cap and needle combination counterclockwise to remove them.
-
4
Twist the capped needle counterclockwise, grasping it low near the hub, to loosen it from the syringe. Dispose of the needle immediately by placing it in a sharps container.
Removing a Luer Lock Needle with a Safety Cover
-
5
Push the finger-pad area of the safety cover with your thumb until you hear a "click" indicating the safety cover has engaged.
-
6
Twist the safety capped needle counterclockwise, holding it near the hub, to remove the capped needle.
-
7
Dispose of the capped needle into a sharps container.
-
1