How to Raise a Fire Axe

Firefighters often must raise their axes through windows or to higher levels of buildings. Obviously, carrying an ax up a ladder is not safe or practical, so hoisting an ax is the best and safest method of getting an ax to hard-to-reach places. It involves knowing the proper method of tying an ax with rope, insuring that it wall not drop on the way up, and then using a pulley to raise the ax to firefighters who need it.

Things You'll Need

  • Fire rope
Show More

Instructions

    • 1

      Instruct a firefighter in the building to lower a fire rope from a window or opening to you or a waiting fire team on the ground.

    • 2

      Tie the end of the lowered rope (the hoisting rope) near the head of the ax, just before the blade, using a figure-eight knot (looping the rope over and under itself in a figure eight, then passing the end of the rope through the first loop) or a clove hitch (make two loops next to each other with the rope, lay one loop over the other and putting the ax through both loops). (See Resources)

    • 3

      Slide the knot to the handle of the base of the ax head.

    • 4

      Loop the standing portion (the loose end) of the rope under the head. This will keep the handle parallel to the rope so when it is raised the firefighters will receive the ax handle first.

    • 5

      Tie one or two half-hitches (the most basic knot) on the handle of the ax to stabilize the ax. (See Resources)

    • 6

      Signal the firefighters above to being raising the ax.

Work Safety - Related Articles